craiyon logo

A technical drawing shows a pipe with nozzles tilted at 120 degrees, labeled with length 1.6m and tray dimensions 4m x 0.1m.

A technical drawing shows a pipe with nozzles tilted at 120 degrees, labeled with length 1.6m and tray dimensions 4m x 0.1m.

Here’s a quick conceptual plan of the setup: The panel (pipe holding 6 nozzles) is mounted so that it forms a 120° angle with the horizontal (so it’s leaning backward) The nozzles are spaced evenly along 1.6 m length (vertical height of the tray) Each nozzle sprays downward, hitting the top and long side of the tray I’ll generate a simple 2D technical drawing showing the panel and nozzles at the correct angle with measurements and nozzle positions labeled. Give me a moment! Here is a schematic drawing based on your description: The vertical pipe is 1.6 m long (height of the tray). 6 nozzles are spaced evenly, one below the other. The pipe (panel) is tilted at 105° from horizontal (so it’s leaning back). Nozzles spray vertically downward. Drawing explanation: Panel pipe (blue) length: 1.6 m Nozzles (red circles) spaced evenly on pipe, each sprays straight down Tilt angle: 120° from horizontal Tray dimensions shown for reference (1.6 m high, 4 m long, 0.1 m deep) The spray covers the top and long side of the tray as requested If you want, I can prepare a PDF or DWG with this drawing and specs included. Would you like that? See more