I want a drawing of an acoustic guitar saddle. Show only the saddle. Do not show the rest of the guitar. The drawing should be three-dimensional, and from a viewpoint that is 45 degrees from the front, 45 degrees from the side, and 45 degrees from the top. Bevels should be cut into the front face of the saddle for compensation (moving the contact point with the string back slightly, and each bevel should start about 20 percent down the face of the saddle from the top, and end at the top about halfway across the top edge of the saddle. The bevels should NOT reduce the height of the saddle at any point. There should be a continuous curve along the top end of the saddle from one end to the other., without any kind of bevel, notch or slot that reduces the height of the saddle at any point. See more